Contracting Officer's Representative (FAC-COR)

The Federal Acquisition Certification for Contracting Officer’s Representatives (FAC-COR) program is for acquisition professionals in the Federal Government performing contract management activities and functions. Contracting Officer’s Representatives (CORs) play a critical role in ensuring that contractors meet the commitment of their contracts. They facilitate proper development of requirements and assist Contracting Officers in developing and managing their contracts. The purpose of this program is to establish training and experience requirements for those acquisition professionals. The FAC-COR applies to all executive agencies, except the Department of Defense (DoD).

Additional information on the FAC-COR may be found by using the navigation links below.

FAC-COR Certification Requirements

Acquisition Training Providers

Continuous Learning Requirements

FAC-COR Competencies

Contracting Officer’s Representative Policy Documents

Contracting Officer's Representative Functional Advisory Board (COR FAB)

Frequently Asked Questions (FAQs)

FAC-COR Certification Requirements

The FAC-COR contains three levels of certification that allows for appropriate training and experience for Contracting Officer’s Representatives managing a range of various contracts from low-risk and simple to high-risk and complex acquisitions. The FAC-COR shall be recognized by all federal civilian agencies as evidence that an employee meets core requirements to perform Contracting Officer’s Representative functions.

FAC-COR certification is managed and awarded at the agency level. Each agency has a designated Acquisition Career Manager (ACM) responsible for managing the certification requirements of the acquisition workforce members in each agency. Agencies covered by the FAC-COR program may require additional training and experience beyond the basic FAC-COR requirements. Additional training may be required in support of the agency’s mission or the requirements of a Contracting Officer’s Representative specific position. Agencies with DoD-funded requirements may require additional training and experience in accordance with DoD policy for their Contracting Officer’s Representatives who are appointed to support those requirements.

The FAC-COR Program requirements are governed by the September 6, 2011 Memo on Revisions to the Federal Acquisition Certification for Contracting Officer's Representatives (FAC-COR). This memorandum revises and replaces the November 26, 2007 Memo on The Federal Acquisition Certification for Contracting Officer Technical Representatives (FAC-COTR), revising the competency requirements for CORs, and to establish a risk-based, three-tiered certification program for civilian agencies that better reflects the important role of the COR. The new FAC-COR requirements became effective as of January 1, 2012.

Reciprocity with Other Certifications - Department of Defense (DoD): For Contracting Officer’s Representative professionals coming from DoD with a valid, current COR certification under DoDI 5000.72, an equivalent FAC-COR certification may be granted at the same certification level, provided the FAC-COR experience and continuous learning requirements have been met and the agency ACM approves the certification. When applying for a FAC-COR, the individual is responsible for providing their agency ACM with the documentation supporting their DoD COR certification, experience, and continuous learning history.

Agency Unique Certification Requirements: Federal agencies may have unique certification requirements in addition to the Federal Acquisition Certification (FAC) requirements. Members of the civilian acquisition workforce are encouraged to consult their agency acquisition workforce policies, internal agency websites, and/or their Acquisition Career Manager for additional information.

Because the DoD COR certification program under DoDI 5000.72 has different training requirements, a valid, current FAC-COR does not necessarily meet all the requirements for the DoD certification for Contracting Officer’s Representatives. Civilian agency Contracting Officer’s Representatives seeking positions subject to DoD requirements must meet all agency specific training as required per each agency policy. Reciprocity will be determined by DoD on an individual basis by the specific DoD agency.

Below are the initial certification experience requirements and training recommendations for each FAC-COR level (printer-friendly version).

FAC-COR Requirements (Revised October 1, 2020)


Level I

Level II

Level III

Required Experience*


This level of COR is generally appropriate for simple, low-risk contract vehicles, such as supply contracts and orders.

1 year of previous COR experience required

This level of COR is generally appropriate for contract vehicles of moderate to high complexity and risk, including both supply and service contracts.

2 years of previous COR experience required

Level III CORs are the most experienced CORs within an agency and should be assigned to the most complex, critical risk, and mission critical contracts within the agency. These CORs are often called upon to perform significant program management activities and should be trained accordingly.

Recommended Training**

Note: ACMs/ agencies may identify "equivalent" and/or additional training to satisfy agency specific needs


8 hours of training
  • FCR 110 - Contracting Officer's Representative (COR) Level 1 (self-paced online)
40 hours of training
  • FCR 201 - Contracting Officer's Representative Level 2 (Instructor Led)
60 hours of training
  • FCR 400 - Advance Contracting Officer Representative Workshop (Instructor Led)
  • FPM 120A - Program Management Basics (self-paced online)

* Experience.The requirements for experience are generally based upon the Contracting Officer’s Representatives Qualifications. Experience may be time spent on the job in a Contracting Officer’s Representative related job assignment, either in the private or public sector, which reflects the accumulation of knowledge, skills and abilities during years of progressively responsible work assignments.

There is no exception to the experience requirements and candidates must provide evidence of their experience to their certifying official. Satisfaction of experience requirements from one certification level may be applied to the satisfaction of experience requirements of a higher certification level.

**Training.Each certification level requires a minimum number of training hours covering COR roles and responsibilities as well as fundamental contract rules and regulations. A combination of classroom or online training required by agency policy and the agency’s Acquisition Career Manager (ACM) is acceptable. Each Federal agency may have additional initial certification requirements or equivalent courses to the ones listed in the table above. If you have any questions about your agency's unique requirements, please contact your Acquisition Career Manager (ACM). Individual CORs should also consult with their supervisor and the Contracting Officer to determine any specific training needs.

***FAI maintains a list of previously recommended courses for FAC-COR certification which is archived here. DAU, changed the CLP designations for many of the online courses referenced. The change in CLP’s impacted the viability of the recommended FAC-COR training for initial certification. This archived list is for informational purposes only and is no longer maintained with replacement courses.

Fulfillment may be used by Contracting Officer’s Representatives with significant experience and training as an alternative way to meet the standard training requirements for certification. Fulfillment should be used when appropriate and in compliance with agency policy. The fulfillment process is based on documentation that demonstrates how a workforce member met or accomplished each of the performance outcomes and learning objectives in a specific course. This may be based on contracting experience, alternative training, or another type of certification in the area of contracting and procurement by another organization or other developmental activities. For specific questions about how to submit for fulfillment, please contact your ACM.

Back to Top

Acquisition Training Providers

FAI maintains a list of Commercial Acquisition Training Providers. FAI does not endorse and no longer verifies any vendors’ training materials for alignment with FAC-competencies. You are strongly encouraged to conduct market research to inform training vendor selection.

Back to Top

Continuous Learning Requirements

To maintain a FAC-COR, Contracting Officer’s Representatives are required to earn a minimum amount of continuous learning points (CLPs), beginning from the date of their certification:

  • Level I - 8 CLP hours every 2 years
  • Level II - 40 CLP hours every 2 years
  • Level III - 40 CLP hours every 2 years

The FAI Continuous Learning Opportunities page contains guidance from OFPP, training courses, and other suggested methods of earning CLPs.

Back to Top

FAC-COR Competencies

The FAC-COR Program is built on competencies that refer to the knowledge, skills, and abilities Contracting Officer’s Representatives must have in order to perform their duties.

The revised FAC-COR core competency model portrays the competency areas and further defines the areas in behavioral terms using performance outcome statements and learning objectives.

Back to Top

Contracting Officer’s Representative Policy Documents

Below are OMB and OFPP guidance on the FAC-COR program:

April 15, 2005 Policy Letter 05-01 on Developing and Managing the Acquisition Workforce

November 26, 2007 Memo on The Federal Acquisition Certification for Contracting Officer Technical Representatives (FAC-COTR)

September 6, 2011 Memo on Revisions to the Federal Acquisition Certification for Contracting Officer's Representatives (FAC-COR)

Below is an additional FAI resource for the FAC-COR program:

COR Toolkit

Back to Top

Contracting Officer’s Representative Functional Advisory Board (COR FAB)

The Federal Contracting Officer’s Representative Career Field has a Functional Advisory Board (FAB) which serves as a collaborative, federal-wide working group charged with shaping the management policies and practices of the Federal Acquisition Certification program which is chartered by the Office of Federal Procurement Policy. The FAB Charter establishes the COR FAB to perform continuous review, evaluation, and update of the COR certification within Federal civilian agencies.

Click here to view the COR FAB meeting minutes, briefings and presentations, and other related documents. Please note: This information is password protected. To access this information you must have a userid and password and be a registered user of the FedPM Community of Practice.

Back to Top